info@dis-floors.com

+45 40 26 1777

industrial armoured flooring disxid

The armoured flooring for critical substrates or extreme loads.

disxid

The synthetic resin-bonded armoured flooring for critical substrates or extreme loads.

Area of application

  • Critical refurbishment areas,
  • as a load-bearing substrate for coatings,

Standard version

  • 1,5 up to 4,0 cm dislith – industrial floor with self-supporting version

Load capacity

  • Nach 1 Tag begehbar und beschichtbar,
  • nach 7 Tagen voll belastbar, 
  • High resistance to water, oils and many chemicals

Surface

  • Closed,
  • non-slip,
  • natural beige,
  • not liquid-tight without additional measures

Flatness

  • Following the level of the existing concrete substrate,
  • if necessary, laying in accordance with DIN 18 202, Table 3 is possible by special agreement

Prism strength

disxid – industrial floor

  • Compressive strength > 70 up to 80 N/sqmm
  • Bending tensile strength > 14 N/sqmm

Joint

  • Jointless in the surface,
  • Press joints at the day joints
  • Edge joints between base slab and rising components

Installation conditions

  • Roof and exterior walls rainproof and closed,
  • draught-free,
  • + 10 °C minimum temperature at the substrate,
  • Residual moisture < 8 %