info@dis-floors.com
+45 40 26 1777
Menü
The heavy-duty industrial system floor!
Load-bearing dispac floor slab and displan industrial flooring as a complete solution for heavy-duty use.
The industrial system floor for light to medium loads and as a substrate for coatings! Load-bearing dispac base plate and diston industrial floor as a complete solution.
The ‘most trafficked’ industrial system floor! Load-bearing dispac base plate and disfalt industrial flooring as a complete solution for the heaviest traffic loads.
The plastic-cement-bonded industrial floor for medium and heavy-duty use.
The polymer-modified industrial flooring for light to medium loads and as a base for coatings.
The cold bitumen-bonded industrial floor for medium and high, predominantly rolling loads.
The jointless and unreinforced base slab as a substructure for almost all types of flooring.
Our fastest flooring: ready for traffic after 24 hours, ready for coating after 36 hours.
The plastic-cement-bonded industrial floor for the special requirements of the food industry.
The synthetic resin-bonded armoured flooring for critical substrates or extreme loads.
The monolithic industrial floor on soft substrates with static, structural or fibre reinforcement.
The most frequently installed industrial floor coating!
Robust, hard-wearing, durable, available in many RAL colours.
The hard-wearing, decorative floor coating with visual appeal and increased cleanability.
The floor coating for heavily used surfaces with sufficient slip resistance, from R 11 to R 13 possible.
The visually appealing floor coating for surfaces subject to heavy wear, with a slip resistance of R 9 to R 13.
Conductive floor coating for normal requirements Earth leakage resistance < 1 x 106 Ohm, inexpensive and durable.
Crack-bridging, viscoplastic floor coating for difficult substrates in industrial halls, crack-bridging up to 0.5 mm at +20°C, also available in slip class R 9.
Electrically dissipative coating system, specially designed for the requirements of the electronics industry.
Certified, non-conductive floor coating system in accordance with § 19 of the German Water Resources Act, with general building inspectorate approval and a test number from DIBt Berlin, developed primarily for the storage of water-polluting substances.
Certified, non-conductive floor coating system in accordance with § 19 of the German Water Resources Act, with general building inspectorate approval and a test number from DIBt Berlin, developed primarily for the storage of water-polluting substances.
Water vapour permeable floor coating especially for magnesite screeds or for floors that must remain breathable. Non-slip version up to R 12 and also conductive possible.
Economical surface protection with optimised performance for almost all floor types thanks to a two-layer epoxy resin sealing system.
Surface treatment of the industrial floor using the finest diamond grinding technology.
The particularly economical alternative to sealants to improve the visual appearance with an enormous reduction in cleaning effort.
Finished with diamond grinding. The hard-wearing, polished and shiny floors.
The expansion joint profile is the ideal solution for new builds and renovations.
The profile for joint formation in industrial floors.
The flat edge protection profile as an optimum limitation of the performance ranges and working areas.
The L profile equipped with Nelson anchors is the perfect finish.
The optimum connection for property extensions.
We integrate the industrial surface heating systems into our seamless dispacplan, dispacton and dispacfalt system floors and offer freedom in planning and utilisation.
copyright 2024 Deutsche Industrieboden Service GmbH
Concept & realization: nxt gen digital GmbH
