info@dis-floors.com

+45 40 26 1777

non-conductive floor coating dispox® - WHG AS

The non-conductive floor coating system in accordance with § 19 of the Water Resources Act

dispox® - WHG AS

Certified, non-conductive floor coating system in accordance with § 19 of the German Water Resources Act, with general building inspectorate approval and a test number from DIBt Berlin, developed primarily for the storage of water-polluting substances.

Area of application

  • LAU systems (storage rooms for water-polluting substances with a flash point above 55°C)

Characteristics

  • Tested floor coating with general building authority approval from DIBt Berlin,
  • Resistant to chemical groups according to the approval of the liquid table 3 – 14,
  • hard-wearing, durable,
  • Colour shades RAL 7032 and RAL 7030

Standard version

  • 2.0 mm epoxy resin coating
  • Crack bridging up to 0.2 mm

Load capacity

  • Compressive strength 70 N/mm²

Surface

  • smooth,
  • shiny

Electrical discharge capacity

  • 104 – 10Ohms
 

Flatness

  • Follow the course of the subfloor,
  • According to DIN 18 202, table 3, line 3

Substrate

  • Steel fibre concrete,
  • Screed or mastic asphalt,
  • Residual moisture < 4% measured according to CM,
  • Adhesive tensile strength> 1.5 N/mm²,
  • Crack width restriction up to 0.2 mm 

Joint

  • Jointless in the surface,
  • Building joints must be accepted.