info@dis-floors.com

+45 40 26 1777

Industrial system floor dispacfalt

The complete solution consisting of a dispac base plate and disfalt industrial flooring for the heaviest traffic loads.

dispacfalt

The ‘most trafficked’ industrial system floor! Load-bearing dispac base plate and disfalt industrial flooring as a complete solution for the heaviest traffic loads.

Area of application

  • Floor slabs on the ground in haulage and warehousing operations
  • Distribution centre,
  • Freight sheds of the railway,
  • Packaging plants,
  • Multi-storey and underground car parks

Standard version

  • 18cm dispac – unreinforced concrete base slab
  • 1,0 up to 2,5cm disfalt – industrial floor

Surface

  • Closed,
  • non-slip,
  • natural grey,

Electrical discharge capacity

  • Based on DIN 51 953 between 104 and 107 ohms and therefore suitable for potentially explosive areas in Zone 0, Zone 1 and 10 in accordance with the Workplace Ordinance ArbStättV (maximum permissible value: 108 ohms)

Flatness

  • According to DIN 18 202, table 3, line 3

Surface strength

disfalt – penetration depth

  • Tested in accordance with DIN 1996: < 0.8 mm

Joint

  • Jointless in the surface,
  • Press joints at the day joints
  • Edge joints between base slab and rising components

Installation conditions

For the base slab:
drivable subgrade, according to ZTVE-StB 94, weather and soil frost-free. Ev2 > 100 MN/sqm, Ev2/Ev< 2,5

For the covering:
Roof and exterior walls tight and closed, draught-free,
+ 5 °C minimum temperature