info@dis-floors.com

+45 40 26 1777

Industrial system floor dispacplan®

The complete solution consisting of dispac floor slab and displan industrial flooring for heavy-duty use.

dispacplan®

The heavy-duty industrial system floor!

Load-bearing dispac floor slab and displan industrial flooring as a complete solution for heavy-duty use.

Area of application

  • Floor slabs on the ground in production facilities,
  • warehouses,
  • workshops,
  • transshipment halls,
  • high-bay warehouses,
  • printing works,
  • DIY stores

Standard version

  • 18cm dispac – unreinforced concrete base slab
  • 1,0 up to 2,5cm displan – industrial floor

Load capacity

Standard

  • area loads up to 100 kN/sqm
  • single loads up to 60 kN/sqm

Surface

  • Closed,
  • non-slip,
  • natural grey,
  • Oil and water resistant

Electrical discharge capacity

  • Based on DIN 51 953 between 104 and 107 ohms and therefore suitable for potentially explosive areas in Zone 0, Zone 1 and 10 in accordance with the Workplace Ordinance ArbStättV (maximum permissible value: 108 ohms)

Flatness

  • According to DIN 18 202, table 3, line 3

Prism strength

displan – industrial floor

  • Compressive strength > 50 N/sqmm
  • Bending tensile strength > 10 N/sqmm

 

Joint

  • Jointless in the surface,
  • Press joints at the day joints
  • Edge joints between base slab and rising components

Installation conditions

For the base slab:
drivable subgrade, according to ZTVE-StB 94, weather and soil frost-free. Ev2 > 100 MN/sqm, Ev2/Ev< 2,5

For the covering:
Roof and exterior walls tight and closed, draught-free,
+ 5 °C minimum temperature