info@dis-floors.com

+45 40 26 1777

viscoplastic floor coating dispox® - Flex

The crack-bridging, tough-elastic floor coating for difficult substrates

dispox® - Flex

Crack-bridging, viscoplastic floor coating for difficult substrates in industrial halls, crack-bridging up to 0.5 mm at +20°C, also available in slip class R 9.

Area of application

  • Production facilities
  • Assembly areas in the storey,
  • Technical control centres,
  • Steel platforms,
  • Renovation of Basatin, Stelcon and tamped asphalt 

Characteristics

  • Crack-bridging coating up to 0.2 mm crack width, at 20°C,
  • Flexibilised epoxy resin – no polyurethane,
  • Particularly applicable in storeys,
  • For difficult substrates and/or difficult components,
  • High installation performance
  • Time-delayed installation possible
  • Fully coloured, homogeneous surface
  • Improved cleaning ability
  • Significantly improved cleanability when using a special cleaning agent
  • Liquid-tight on the surface
  • Many standard colours

Standard version

  • 2.0 mm epoxy resin coating

Load capacity

  • up to 46 N/mm²,
  • Bending tensile strength 33 N/mm²,
  • shore D 60

Surface

  • smooth,
  • shiny
  • Slip class R9

Electrical discharge capacity

  • non-conductive, > 109 Ohm
 

Flatness

  • Follow the course of the subfloor,
  • also panelled floors

Substrate

  • Concrete,
  • Screed or mastic asphalt,
  • tamped asphalt,
  • Stelcon plates,
  • Metal plates,
  • Residual moisture < 4% measured according to CM,

Joint

  • Jointless in the surface,
  • Building joints must be accepted.