info@dis-floors.com

+45 40 26 1777

industrial flooring disrapid

Can be driven on after 24 hours.

disrapid

Our fastest flooring: ready for traffic after 24 hours, ready for coating after 36 hours.

Area of application

  • Refurbishments that require rapid loading,
  •  as a substrate for coatings
  • as a height levelling and equalising layer.

Standard version

  • 1,0 up to 5 cm disrapid – industrial floor

Load capacity

  • Walkable after 12 hours,
  • Fully loadable after 2 days and sufficiently dry (< 4 % residual moisture) for the application of reaction resin coatings

Surface

  • Closed,
  • non-slip,
  • natural grey,
  • Oil and water resistant
  • Grinding wear <= 10 -12 cm³/50 cm²

Flatness

  • Following the level of the existing concrete substrate,
  • falls erforderlich ist eine Verlegung gemäß DIN 18 202, Tabelle 3 nach besonderer Vereinbarung möglich

Prism strength

disrapid – industrial floor

  • Compressive strength > 50 N/sqmm
  • Bending tensile strength > 6 N/sqmm

Joint

  • Jointless in the surface,
  • Press joints at the day joints
  • Edge joints between base slab and rising components

Installation conditions

For the base slab:
Concrete, minimum quality C20/25 (B 25) or d i s p a c – base slab, surface firm, rough, open-pored, free of sludge, separating films and loose components

For the covering:
Roof and exterior walls tight and closed, draught-free,
+ 5 °C minimum temperature